Inspect Turn Signal Flasher Assembly
(a) Disconnect the connector from the turn signal flasher.
(b) Measure the voltage according to the value(s) in the table below.
|
Tester connection |
Condition |
Specified condition |
|
1 - body ground |
Turn ignition switch on (IG) |
10 to 14 V |
|
1 - body ground |
Turn ignition switch off |
Below 1 V |
|
4 - body ground |
Always |
10 to 14 V |
|
7 - body ground |
Always |
Below 1 V |
Post a comment