Justin's Toyota Service

2003 Toyota Yaris Panel Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

(a) Remove the shift lever knob sub-assembly.

3. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

(a) Remove the position indicator housing assembly.

4. REMOVE SHIFT LOCK RELEASE BUTTON COVER

(a) Using a screwdriver, remove the shift lock release button cover from the position indicator housing assembly.

5. REMOVE CONSOLE BOX UPPER

HINT:

6. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER

HINT:

7. REMOVE CONSOLE BOX ASSEMBLY

HINT:

8. REMOVE CONSOLE BOX FRONT

HINT:

9. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Disconnect the transmission control cable assembly from the transmission floor shift assembly.

Stopper-7
P		C130425E01

10. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Disconnect the 2 connectors and clamp.

(b) Remove the 4 bolts and floor shift assembly.

DISASSEMBLY

1. REMOVE INDICATOR LIGHT WIRE

(a) Remove the indicator light wire from the floor shift assembly as shown in the illustration.

(b) Remove the position indicator bulb from the indicator light wire.

(c) Remove the position indicator bulb cap from the position indicator bulb.

(d) Separate the transmission control switch connector.

(e) Using a screwdriver, release the stopper.

(f) Using a screwdriver, disengage the locking lug of terminal (4) and (8), and pull the terminals out from the rear.

2. REMOVE POSITION INDICATOR SLIDE COVER

(a) Using a screwdriver, remove the position indicator housing upper. NOTICE:

Be careful not to damage the position indicator housing upper.

(b) Remove the position indicator slide cover from the shift lever guide housing.

(c) Remove the position indicator slide cover No. 2.

3. REMOVE SHIFT LOCK RELEASE BUTTON

(a) Remove the shift lock release button and spring from the floor shift assembly.

4. REMOVE SHIFT LOCK CONTROL ECU SUBASSEMBLY

(a) Disconnect the connector.

(b) Using a screwdriver, remove the shift lock control ECU sub-assembly.

5. REMOVE SHIFT LOCK SOLENOID

(a) Remove the shift lever nut and lock pin from the floor shift assembly.

(b) Remove the shift lever guide housing from the floor shift assembly.

NOTICE:

First remove the shift lever nut and lock pin, then disengage the 2 claws.

(c) Remove the screw and shift lock solenoid.

6. REMOVE TRANSMISSION CONTROL SWITCH

(a) Remove the transmission control switch from the shift lever guide housing.

0 0