Front Speed Sensor Components
- Resin Clip
- Front Speed Sensor
pN-ni (kgf-cm, ft ibi) | : Specified torque f CIS /SS
|
" ■ .. |
\ | ||||
|
\ x |
\ | ||||
|
n |
- |
1. DISCONNECT SPEED SENSOR CONNECTOR (a) Remove the front wheel. (b) Remove the fender liner. (c) Disconnect the speed sensor connector and resin clip. 
liSlitfwt?^ x 2. REMOVE SPEED SENSOR (a) Remove the 2 clamp bolts holding the sensor harness from the body and shock absorber. Torque: 8.0 N-m (82 kgf cm, 71 tn. lbf) 
(b) Remove the speed sensor installation bolt from the steering knuckle. At the time of installation, please refer to the following item. There are no foreign objects on the sensor or the part of the knuckle to which the sensor is to be installed. The sensor is installed flat against the knuckle when you tighten the bolt. |
Related posts
- Tilt Steering Column Components Toyota Celica 2000 Repair 2
- Automatic Transaxle Unit Toyota Celica 2000 Repair 2
- Engine Coolant Temperature Ect Sensor Components Toyota Celica 2000 Repair 2
- Power Source Toyota Celica 2000 Repair 2
-
How To Remove Crankshaft Timing Pulley On 2000 Toyota Celica Gts. Toyota Celica 2000 Repair 2
Post a comment