Assemble Synchronizer Ring Holder
Hook the synchronizer ring holder ends to the thrust piece. NOTE:
• Align the synchronizer ring holder ends so they are not both facing in the same direction.
• Be sure the synchronizer ring holders are parallel and not intersecting.
(a) Install synchronizer ring No. 1.
(b) Apply gear oil to the needle roller bearing.
(c) Install the needle roller bearing and the 1st gear.
(d) Apply MP grease to the straight pin and 1st gear thrust washer.
(e) Install the 1st gear thrust washer onto the output shaft with the straight pin aligned with the 1st gear thrust washer.
Related posts
- Sst Mkd Toyota Land Cruiser FJ BJ HJ 62 70 73 75 Repair
-
Adjust Steering Knuckle Alignment Toyota Land Cruiser FJ BJ HJ 62 70 73 75 Repair
- Sst Dhv Toyota Land Cruiser FJ BJ HJ 62 70 73 75 Repair
- Adjust Drive Pinion Preload Toyota Land Cruiser FJ BJ HJ 62 70 73 75 Repair
- Assembly Of Transfer Toyota Land Cruiser FJ BJ HJ 62 70 73 75 Repair
Post a comment