Justin's Toyota Service

Removal Of Radiator

• RepairSurge Auto Repair Software
• Best Plans To Build HHO Dry Cell with HHO Torch
• Easy Small Engine Repair Guide

Upper Radiator Support Seal

Upper Radiator Support Seal

Water Temp. Sensor Connector (w/ A/C) or Water Temp. ~ & Switch Connector (w/o A/C)

Lower Radiator Support Seal

Front Luggage Under Cover

Upper Radiator Support Seal

Upper Radiator Support Seal

Water Temp. Sensor Connector (w/ A/C) or Water Temp. ~ & Switch Connector (w/o A/C)

Lower Radiator Support Seal

Front Luggage Under Cover

No.1 Cooling Fan Connector

No.1 Cooling Fan (Engine)

No.2 Cooling Fan Connector

No.1 Cooling Fan Connector

No.1 Cooling Fan (Engine)

No.2 Cooling Fan Connector

♦ Non-reusable part

C00985

DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY

CAUTION: Work must be started after approx. 20 seconds or longer from the time the ignition switch is turned to the "LOCK" position and the negative (-) terminal cable is disconnected from the battery.

REMOVE FRONT LUGGAGE UNDER COVERS

DRAIN ENGINE COOLANT (See page CO-6)

REMOVE UPPER RADIATOR SUPPORT SEAL

Remove the seven clips and support seal.

5. DISCONNECT RADIATOR HOSES

6. REMOVE FRONT HOOD LOCK

Remove the two bolts and hood lock.

7. DISCONNECT RADIATOR COOLING FAN CONNETORS

8. DISCONNECT WATER TEMPERATURE SENSOR (w/A/C) or SWITCH (w/o A/C) CONNECTOR

9. REMOVE RADIATOR AND COOLING FANS

(a) Remove the two bolts and upper support. Remove the two upper supports.

(b) Remove the radiator and two cooling fan assembly.

(c) Remove the two lower supports.

C01028

10. REMOVE NO.1 AND NO.2 COOLING FANS FROM RADIATOR

Remove the three bolts and cooling fan. Remove the two cooling fans.

C01028

+1 0

Average user rating: 5 stars out of 1 votes