Front Wheel Skid Restraining Control Making a Right Turn
In the front wheel skid restraining control, the brakes of the front wheels and the rear wheel of the inner circle of the turn are applied. Also, depending on whether the brake is ON or OFF and the condition of the vehicle, there are circumstances in which the brake might not be applied to the wheels even if those wheels are targeted for braking.
The diagram below shows the hydraulic circuit in the pressure increase mode, as it controls the front wheel skid condition while the vehicle makes a right turn.
In other operating mode, the pressure holding valve and the pressure reduction valve are turned ON/ OFF according to the ABS operation pattern.
When the front wheel skid restraining control is activated, each solenoid valve operates as show in the table on the next page.
Post a comment