Justin's Toyota Service

Rear Brake Shoes

• RepairSurge Auto Repair Software
• Best Plans To Build HHO Dry Cell with HHO Torch
• Easy Small Engine Repair Guide

Removal & Installation (RAV4)

1. Remove brake drum. Disconnect return spring from both shoes. Remove hold-down spring, cups and pin from front shoe. Disconnect anchor spring, and remove front shoe. Remove anchor spring from rear shoe.

2. Remove rear shoe hold-down spring, cups and pin. Disconnect parking brake cable from brake lever. Remove rear shoe with adjuster. See Fig. 10 .

3. To install, reverse removal procedure. Apply lithium soap-base glycol grease and high-temperature grease to moving parts (DO NOT get grease on brake shoe linings or drum).

4. Check operation of automatic adjuster by moving parking brake lever of rear shoe back and forth, and ensure that adjuster turns. Adjust parking brake-to-drum clearance to .024" (.60 mm). Bleed system and check for leaks.

2001 BRAKES Disc & Drum - Trucks & Vans

Fig. 10: Exploded View Of Rear Drum Brake Assembly (RAV4) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 10: Exploded View Of Rear Drum Brake Assembly (RAV4) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Removal & Installation (Sienna)

1. Remove brake drum. Disconnect return spring from automatic adjusting lever. Remove return spring from rear shoe. Remove automatic adjusting lever.

2. Remove hold-down spring, cup and pin from front shoe. Disconnect anchor spring, and remove front shoe. Remove automatic adjuster. Remove anchor spring from rear shoe.

3. Remove rear shoe hold-down spring, cup and pin. Disconnect parking brake cable from brake lever. Remove rear shoe. See Fig. 11 .

4. To install, reverse removal procedure. Apply lithium soap-base glycol grease and high-temperature grease to moving parts (DO NOT get grease on brake shoe linings or drum).

5. Check and adjust clearance between brake shoes and drum to .020" (.5 mm). Bleed system and check for leaks.

2001 BRAKES Disc & Drum - Trucks & Vans

Fig. 11: Exploded View Of Rear Drum Brake Assembly (Sienna) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Removal & Installation (Tacoma & Tundra)

1. Remove brake drum. Disconnect return spring from both shoes. Remove hold-down spring, cups and pin from front shoe. Disconnect anchor spring, and remove front shoe. Remove anchor spring from rear shoe.

2. Remove rear shoe hold-down spring, cups and pin. Remove adjusting lever spring. Disconnect parking brake cable from brake lever. Remove rear shoe. See Fig. 12 .

3. To install, reverse removal procedure. Apply lithium soap-base glycol grease and high-temperature grease to moving parts (DO NOT get grease on brake shoe linings or drum).

4. Check operation of automatic adjuster by moving parking brake lever of rear shoe back and forth, and ensure that adjuster turns. Adjust parking brake-to-drum clearance to .004" (.50 mm). Bleed system and check for leaks.

2001 BRAKES Disc & Drum - Trucks & Vans

Fig. 12: Exploded View Of Rear Drum Brake Assembly (Tacoma & Tundra) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Removal & Installation (4Runner)

1. Remove brake drum. Disconnect return spring from rear shoe. Remove hold-down spring, cups and pin from rear shoe. Disconnect anchor spring , and remove rear shoe. Remove anchor spring from front shoe.

2. Remove front shoe hold-down spring, cups and pin. Remove return spring from front shoe. Remove front shoe and adjuster. Disconnect parking brake cable from front shoe.

3. To install, reverse removal procedure. Apply lithium soap-base glycol grease and high-temperature grease to moving parts (DO NOT get grease on brake shoe linings or drum).

4. Adjust bellcrank by pulling lever away ("A") from backing plate until there is no slack in lower end of arm ("B"). Turn adjusting bolt so clearance ("C") is .016-.031" (.40-.78 mm). Lock adjusting bolt lock nut. Connect parking brake cable to bellcrank, and install clip. Install tension spring. See Fig. 13 and Fig.

5. Check operation of automatic adjuster by moving parking brake lever of rear shoe back and forth, and

2001 BRAKES Disc & Drum - Trucks & Vans ensure that adjuster turns. Adjust parking brake-to-drum clearance to .020" (.50 mm). Bleed system and check for leaks.

Fig. 13: Exploded View Of Rear Drum Brake Assembly (4Runner) Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2001 BRAKES Disc & Drum - Trucks & Vans

Fig. 14: Adjusting Bellcrank (4Runner)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Fig. 14: Adjusting Bellcrank (4Runner)

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

0 0