Justin's Toyota Service

Removal Of Distributor

• Solutions To Cutting Gas And Diesel Costs Within Minutes
• Building A New Home Or Home Improvement

1. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAP

2. DISCONNECT DISTRIBUTOR CONNECTOR

3. REMOVE DISTRIBUTOR CAP AND PACKING

4. SET NO.1 CYLINDER TO TDC/COMPRESSION

(a) Remove the oil filler cap.

(b) Look through oil filler hole and turn the crankshaft clockwise until the cam nose can be seen.

(c) Turn the crankshaft counterclockwise approximately 120°.

(d) Turn the crankshaft again approximately 10° to 40° clockwise so that the timing belt cover TDC mark and the crankshaft pulley TDC mark are aligned.